DL - Messages

 

mq_fec_to_chronos

7644 - DL Start Cold Level Reporting Interface - When a plate/piece is reported as starting cold level.
7645 - DL Complete Cold Level to MES - When a plate/piece is reported as cold Levelled.
7651 - DL Start Auto Stencil - When a plate/piece is reported as starting Auto Stencil.
7652 - DL Auto Stencil Complete to MES - When a plate/piece is reported as stencilled after levelling.
7654 - Paint Marking Details - Immediately after rolling and On Re-allocation of a plate post rolling.
7708 - Plate Stamping Details - Immediately after rolling and On Re-allocation of a plate post rolling.
7783 - Test Piece Load Received at Scunthorpe Test House - When a load (pallet) of tests is received at Scunthorpe Test House.
7785 - Passed or Failed Tests to MES - When a plate passes mechanical Tests in Scunthorpe Test House Routine.
7792 - Consignment No Assignment Interface - On receipt of a Despatch Message.
7801 - Plate Certified Interface - When pieces have been Certified (On a regular run there could be several hundred at once).
7820 - Plate Details Request DL - Plate Details Request.

mq_chronos_to_fec

7600 - Manufacturing Order - Works order creation , updation or deletion.
7612 - Skelp to Slab allocation message - This interface sends a plate allocation message from the MES. Whenever Skelp arrives at DL or is re-allocated after that.
7613 - Skelp deallocation message - Whenever a skelp is de-allocated.
7614 - Skelp / Slab Update (Including Defect/Hold) - When a skelp/slab is reported as updated including defect/hold.
7616 - Plate Cutting Plan from MES to SCT & PC-DLFEC - Slab Cutting
7617 - Bought in Slabs - Slab Cutting.
7620 - Skelp / Slab Update (Remove Hold) - When a skelp/slab is reported as updated & hold removed.
7621 - ??? - Part Skelp Allocated.
7634 - Plate Number Assignment Request - When a plate/piece plate no is requested.
7640 - DL Cross Sheared - When a plate/piece is reported as cross sheared.
7641 - DL Start Side Shear - When a plate/piece is reported as side sheared.
7642 - DL End Side Shear - When a plate/piece is reported as side sheared.
7655 - Charge DL RHF East (Normalise) - When a plate/piece is reported as started Normalise.
7656 - Discharge DL RHF East (Normalise) - When a plate/piece is reported as Normalise
7684 - Charge DL Bogie - Dehydrogenise - When a plate/piece is reported as started dehyd.
7706 - DL Start Gas Cut - When a plate/piece is reported as gas cut started, when the gas cut details for a plate/piece are reported as cancelled.
7707 - DL End Gas Cut - When a plate/piece is reported as gas cut, when the gas cut details for a plate/piece are reported as cancelled.
7780 - Test Arrival - When a Plate is test selected whether tested, covered or both.
7781 - Test Piece Load Complete - When a load (pallet) of tests is complete and ready for dispatch to Scunthorpe.
7782 - Batch Breakdown/Transfer - When the user wants to break a batch and re-batch to another test plate for a specific test type.
7786 - Test Piece Load Re-Print - When a test load re-print is required.
7790 - Advice Created (External) - When a plate/piece is reported as Despatched.
7791 - Advice Created (Internal) - When a plate/piece is reported as Despatched.
7793 - Plate Cancel Advice - When full advice/consignment is returned/cancelled.
7794 - Plate Return a Single Despatch Piece - When a single piece is returned.
7800 - Test Certification Automatic Details Message - When a plate/piece is reported as Despatched and ready for certification.
7803 - Test Certification Manual Details Message - When a plate/piece is requested for certification.
7810 - DL Slab Plate Movements Interface - When reporting a slab located in the Plate Mill or plate as being moved. It should include movements to and from Rucks and internal wagons (not for despatch).
7815 - Notional Piece De-allocation (Scrapped) - When a notional piece is reported as scrapped or not made as planned either on the shearline or post Shearline.
7817 - Physical Piece De-allocated (Scrapped) - 1 Cobbled Piece, 2 When a physical piece is reported as scrapped.

mq_mcc_to_chronos

7627 - Slab Re-heating Discharge and Detail to MES - When a plate/piece is reported as completed re-heating.
7630 - Slab Return to MES - When a slab is reported as discharged but not rolled.
7632 - Plate Rolled to MES - On completion of rolling or cobbled.
7635 - Plate Number Assignment Response - When a plate/piece is rolled or in response to a plate number assignment request.
7636 - Start Rolling - When a Slab Enters the Rolls.
7811 - Slab Plate Movements Interface - When reporting a slab located in the Plate Mill or plate as being moved. It should include movements to and from Rucks and internal wagons (not for despatch).

mq_chronos_to_mcc

0 - ???
7628 - Slab Charge to Pusher or Pits - When a slab is charged to the pusher or pits.