To reset Ernitec Network cameras
To reset the camera, power cycle the camera while pressing the reset button for about 6 seconds after powering on.
Once reset, you can connect to it using 192.168.0.100 using Admin 123456
Your PC must be on the same network to connect, obviously, suggest 192.168.0.101 255.255.255.0 GW[optional] 192.168.0.1
NOTE: Connect to LAN port and change LAN settings on camera to suit connected network. Change username and password as required and reboot.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.